Next Previous Contents

The NetWinder Rescue-HOWTO

Ralph Siemsen, ralphs@netwinder.org

$Revision: 1.5 $, $Date: 2000/11/19 17:15:26 $


This document explains how to restore a NetWinder using the `Rescue Filesystem' that is now being shipped on all units. This is expected to replace, for most cases, the other methods of rescue (which are described in the Disk-Update-HOWTO). This document also contains a section on troubleshooting common hardware and software problems on the NetWinder.

1. Introduction

2. Using the rescue partition

3. Rescue partition installation

4. Troubleshooting

5. Misc


Next Previous Contents